Product Overview
The RKI Instruments 33-0413RK-02 is a 5-micron replacement filter element for the Parker water-trap filters 33-0413RK and 33-0414RK. The 33-0413RK housing is a water trap with a 5-micron element, polycarbonate bowl and female 1/4" NPT ports.
The RKI Digester Gas Monitor manual lists this element as the “water trap filter element” for both of its water traps:
- Internal water trap (to the left of the main circuit board; replacement trap 33-0413-12)
- External water trap (field-installed in the compressed air line close to the monitor; replacement trap 33-0413RK)
When to Replace
- RKI’s Digester preventive maintenance includes a monthly visual check of the water trap element.
- Replace the element if it is dirty or clogged. A full water trap or clogged element is one cause of low flow.
Replacing the Element (Digester Gas Monitor)
- Turn off the monitor and its power, and close the flow regulator (knob fully counterclockwise). For the external trap, also shut off the compressed air.
- Disconnect the tubing from the bottom of the trap and unscrew the bowl. Keep the bowl O-ring in the lid.
- Unscrew the element holder. Don’t lose the black deflector and gasket.
- Fit the new element with the grooved end down into the holder, then reinstall the deflector (curved side toward the element) and gasket.
- Reassemble, reconnect the tubing, restore air and power, and set the sensor flow to 3 SCFH.
Other Digester filters: oil mist filter 33-0164RK, particle filter 33-0167RK and hydrophobic filter 33-0171RK.
References
- RKI Instruments 2026 Price List (02/17/2026)
- RKI Digester Gas Monitor Operator’s Manual 71-0266RK (Rev. S, released 1/22/24)
(P/N: 33-0413RK-02)