About SENSIT Technologies
SENSIT Technologies designs and builds portable gas detection instruments in Valparaiso, Indiana, where it also does its engineering, sensor calibration and repair under an ISO 9001 quality system. The company's instruments are used mainly in the natural gas, propane and fire service industries, for gas leak investigation, and for personal and confined-space monitoring. Ideal Calibrations stocks calibration gas, sensors and calibration accessories for SENSIT instruments.
SENSIT GOLD G2 (GOLD 2)
The GOLD G2 is a pumped multi-gas leak detector for finding, pinpointing and grading above- and below-ground gas leaks. It is also used for confined-space monitoring, pipeline purging, and inert-gas work where combustibles must be read in an oxygen-free atmosphere.
- Combustibles in % LEL, with % volume and ppm (0–10,000 ppm) optional
- Selectable gas type: methane (natural gas) or propane
- Displays up to four gases at once: LEL, O2, CO, H2S, with HCN optional
- Internal pump, audible "tick" mode for leak location, and alkaline batteries (about 18 hours)
SENSIT P400
The P400 is a four-gas personal monitor (% LEL, O2, CO and H2S) with an intrinsically safe design and audible, visual and vibration alarms, including STEL and TWA. Other available sensors include HCN, NO2, SO2, PH3 and ethylene oxide. It runs on 4 AA alkaline batteries or a NiMH pack, and it can be calibrated manually or on the optional SCAL-400 calibration and charging station.
Calibration gas and parts for SENSIT instruments
- Calibration Gas Blend 0064, SENSIT 4-gas: 25 ppm H2S, 100 ppm CO, 50% LEL methane, 20.9% O2, balance nitrogen
- SENSIT P400 calibration cup assembly, 880-00057
- SENSIT methane sensor, 0–100% LEL, 375-2611-01
- CO replacement sensor for SENSIT GOLD, 375-COAF-SN
- H2S replacement sensor for SENSIT, 375-H2SA1
Sources: SENSIT Technologies product pages and GOLD G2 and P400 datasheets.