Overview

Providing protection from up to five potential atmospheric hazards including oxygen, combustible and toxic gases, GasAlertMicro 5 is unparalleled in its versatility, capability and overall value. BW Technologies by Honeywell's newest addition to its water-resistant line of portable gas detectors has transformed the market with its matchless array of features. Continuously monitoring and displaying concentrations of up to five gases, the compact and lightweight GasAlertMicro 5 was designed and engineered with an extensive host of applications in mind.

Features

• Integral concussion-proof boot
• Optional integral motorized pump option for remote sampling
• Powered by three AA alkaline batteries or a hot-swappable rechargeable battery pack
• Triple alarms (audible, visual and vibrating)
• Multi-language support in English, French, German, Spanish and Portuguese
• Large, user selectable backlit LCD
• Four alarm levels: Low, High, TWA and STEL
• Compatible with MicroDock II Automatic Test and Calibration Station
• Datalogging models store and recall event information
• Wide range of user selectable field options including password protection, safe and stealth modes.

Self-Tests

Full function self-test confirms sensor, battery and circuitry integrity and audible/visual alarms on activation

GasAlertMicro 5 IR

Compact and lightweight, simultaneously monitors up to five atmospheric hazards and alerts you I the event of low, high, TWA or STEL alarm condition.

Features & Benefits:

• Monitors CO2 (IR), H2S, CO, O2, SO2, NH3, O3 and combustibles
• 0-5% vol (0-50,000 ppm) measurements of carbon dioxide
• Simple automatic calibration procedure

Product overview

GasAlertMicro 5 IR portable gas detector simultaneously monitors up to five atmospheric hazards including carbon dioxide (CO2), oxygen (O2), combustible gas (%LEL), and a wide selection of toxic gases. Compact and lightweight, GasAlertMicro 5 IR activates audible, visual and vibrating alarms in the event of a low, high, TWA or STEL alarm condition.

Additional Features

• 0-5% vol (0-50,000 ppm) measurement of carbon dioxide
• Integral concussion-proof enclosure for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for up to five gases
• Two power options: three AA alkaline batteries or a rechargeable battery pack
• Simple automatic calibration procedure; compatible with BW Technologies by Honeywell's MicroDock II system
• Provides 95 dB alarm tone, two bright wide-angled alarm bars and internal vibrating alarm for high noise areas
• Multi-language support in English, French, German, Spanish and Portuguese
• Full function self-test of sensor, battery and circuit integrity, and audible/visual alarms
• Two year warranty including sensors (1 year NH3)

GasAlertMicro5 PID

Smaller and 50% lighter than competitive instruments, this portable, multi-gas detector delivers a high-level of protection wherever it’s needed.

Features & Benefits:

• Monitors VOCs (PID), H2S, CO, O2, SO2, PH3, CI2, NH3, NO2, HCN, CIO2, O3 and combustibles
• Water-resistant
• 0 -1000 ppm measurement of VOCs (Volatile Organic Compounds)
• Protect Yourself
• Smaller and over 50% lighter than competitive instruments
• Water-resistant design in an integral concussion-proof enclosure
• 0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
• Integral motorized pump option for remote sampling
• Two power options: AA alkaline or rechargeable hot-swappable battery pack
• Provides 95 dB alarm tone and two bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Multi-language support in English, French, German, Spanish, and Portuguese
• Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode
• Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases
• Simple automatic calibration procedure; compatible with BW Technologies by Honeywell MicroDock II automatic test and calibration station
• Records TWA, STEL, and maximum exposures to gas and displays readings on command
• User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, 'SAFE' display function, stealth mode, and selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
• Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms

Want to calibrate the BW GasAlert Micro5? Here's how:

1. Turn the BW GasAlert Micro5 on in normal reading mode. Do this by pressing and holding the power button.
2. Once the BW GasAlert Micro5 is in normal reading mode, you need to send it into calibration mode. Do this by pressing and holding the bottom left and right buttons at the same time. A count down will begin
3. This will send the monitor into zeroing mode. Now is a good time to set the monitor down, and grab your calibration gas, regulator, and calibration adapter.
4. Open the valve on your regulator. This is a very important step so you do not ruin your calibration gas cylinder. Now screw it in to your calibration gas cylinder. Close the regulator once you hear gas spewing out of it. This is the signal to know your regulator is good to close. Continue screwing in the regulator until it stops. Do not overturn it.
5. After the BW GasAlert Micro5 is zeroed, attach the tubing to the hose barb on your regulator. Make sure the tubing is also connected to your calibration adapter.
6. Make sure your calibration gas values on the screen match what is on your calibration gas cylinder!
7. Once the BW GasAlert Micro5 has finished calibration, the BW GasAlert Micro5 will beep, disconnect your tubing and turn off the gas.
8. Congratulations! You have officially calibrated your BW GasAlert Micro5 gas monitor. Make sure to record these readings in your calibration log!